Feb 23

The first question you must ask is ‘What is the market for similar units today?’

Market rates can change quite a bit in both directions.

If an area is suddenly overbuilt or there is the loss of a major employer, rents can go down. In those cases even keeping the current rent may cause you to lose a great tenant.

If the rents have gone up a lot, then you may be leaving too much money on the table.

You can look at a bunch of local ads and Craigslist to get an idea. This can be a lot of work. I cheat and use rentometer.com (they have a free level, but we do enough to make the pro version worth while) Then go and look at their comps to see where you should be as all three bedrooms in Anytown, USA are not created equal.

For a great tenant we do not raise to market, but will often raise a bit. There is a cost to turning a unit in prepping, advertising and lost rent.

If you are not planning on selling the place, getting the last 5% of rent  may be a fools errand. On the other hand if you are selling a place, 5% of additional rent can be thousdands of dollars of added value.

Feb 01

You now are required to install 10 year sealed battery smoke detectors in Milwaukee. We have the law in a large part because Kiddie, the smoke detector manufacturer,  lobbied hard in Milwaukee for the law.

The sales literature claims the life to be ten years from the activation. Now if the ten year detectors actually worked for ten years, without being removed, disabled, or the battery dying they would be a bargain for owners compared to replacing batteries once a year.  However, will they?  I doubt it.

The marketing of a ten year detector may in fact cause more problem as home owners and perhaps some landlords will think ‘Okay, this January 2018, I’ll make a note on my calendar to replace the detectors in December 2027.’ and not continue to check them annually at least.

 

Let’s be clear: You still need to check the ten year units, just as you did with the regular units.

A worrisome fact is they have an “off” selector that drains the battery and permanently disables  the unit. From their literature

 

Q: How do I disable my alarm?
A: Remove the alarm from the mounting plate by rotating it counterclockwise (as indicated by the arrows on the cover of the alarm). Next, on the back side of the alarm, locate the area marked with a long arrow on the product label. Break through the label with a screw driver and turn the screw to the “OFF” position. This will deactivate the alarm, stop the end-of-life warning and render the alarm safe for disposal by draining the battery.
IMPORTANT: Deactivation of the alarm is permanent. Once the alarm has been deactivated, it cannot be reactivated or mounted back onto the mounting plate and will no longer detect smoke or carbon monoxide. This is why it’s imperative to replace your alarm immediately.
The ten year warranty only covers repair or replacing the unit, not the damage caused by them failing to work in a fire seven years from now,  your labor to replace them or even the postage to and from the manufacturer.  Some highlights of one warranty:

 

The obligation of [manufacturer] under this warranty is limited to repairing or replacing the alarm or any part which we find to be defective in material, workmanship or design, free of charge, upon receiving the alarm with proof of date of purchase, postage and return postage prepaid,
 
 In no event shall the Manufacturer be liable for loss of use of this product or for any indirect, special, incidental or consequential damages, or costs, or expenses incurred by the consumer or any other user of this product, whether due to a breach of contract, negligence, strict
liability in tort or otherwise.
 
The Manufacturer shall have no liability for any personal injury, property damage or any special, incidental, contingent or consequential damage of any kind resulting from gas leakage, smoke, fire or explosion.
preload preload preload